Cannot Send Data - Konica Minolta AccurioPress C3080 Quick Manual

5
5.4

Cannot Send Data

If you cannot send data, [Error] is displayed in [Send History] on the [JOB LIST] screen.
Check the free space on the HDD (image controller area).
1
Start the Web browser.
2
Enter the IP address of the image controller in the address bar, and then press [Enter].
AccurioPro Print Manager starts and the registration dialog is displayed.
3
Input a user name into the registration dialog.
You can input up to 64 characters for the user name.
4
In the AccurioPro Print Manager screen, click [Configuration] - [PageScope Web Connection].
The user mode screen of PageScope Web Connection is displayed.
% For details, refer to the [HTML User's Guide].
5
Click [Device Information], and then click [Option].
6
Check [Remain] in [HDD (Pre-RIP/Form/Scan Data)].
% To delete unnecessary scan data, use an HDD TWAIN driver. For details, refer to the user's guide
for the HDD TWAIN driver.
% Automatically delete scan data that are stored in the HDD (image controller area) after the specified
time period has elapsed.
For details, refer to the [HTML User's Guide].
For information about the default administrator password, refer to the [Safety Information].
% Lower the data resolution.
Note that the image quality may be degraded. For details, refer to the [HTML User's Guide].
% Reduce the number of pages.
Divide the originals, or remove pages unnecessary to scan.
5-16 AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L
Cannot Send Data 5.4