Turning The Power Off - Konica Minolta bizhub PRO 1100 Quick Manual

1.1 Turning the Power ON/OFF
Tips
If [Machine is warming up] is displayed on the [MACHINE] screen, it indicates that this machine is in the warm-up state.
Warm-up processing takes approximately 6.5 minutes.

)Turning the power off

A
Turn off the sub power switch.
The touch panel display is cleared, and the Power LED on the
control panel changes from blue to orange.
NOTICE
While the following message is displayed, do not turn off the main
power switch. Otherwise, a problem such as a toner fixation in the
machine may occur.
[Cooling in progress / Power is turned off automatically]
[Power off in progress / Please do not turn the main power off]
B
Turn off the main power switch.
-
The main power switch is located inside the machine.
-
Open the front door of the main body, then open the left
door.
NOTICE
When turning the main power switch off then on, be sure to wait for 10
seconds or longer before turning the main power switch on again. If the
main power switch is turned on again within 10 seconds, the machine
may not function normally.
1-2