Troubleshooting; Replenish And Replace Consumables; Replacing A Toner Bottle - Konica Minolta bizhub PRO 1100 Quick Manual

6

Troubleshooting

6.1

Replenish and Replace Consumables

)Replacing a toner bottle

WARNING
WARNING WARNING
Do not throw toner or a container that contains toner (e.g., toner cartridge and developing unit) into an
open flame. The hot toner may scatter and cause burns or other damage.
CAUTION
CAUTION
-
Do not leave toner-related parts (e.g., toner cartridge and developing unit) within easy reach of
children. Licking any of these parts or ingesting toner could damage your health.
- Do not store toner-related parts (e.g., toner cartridge and developing unit) near devices susceptible
to magnetism, such as precision equipment and data storage devices, otherwise they may
malfunction. They could cause these products to malfunction.
- Do not force open the toner-related parts (e.g., toner cartridge and developing unit). If toner tumbles
from the toner bottle, take utmost care to avoid inhaling it or even getting skin contact.
- If toner lands on your skin or clothing, wash thoroughly with soap and water.
- If you inhale toner, move to a place with fresh air and gargle with a lot of water repeatedly. Should
you get symptoms such as coughing, seek medical advice.
- If you get toner into your eyes, immediately rinse them with running water for over 15 minutes. Seek
medical advice if irritation persists.
-
If you swallow toner, rinse out your mouth and drink a few glasses of water. Seek medical advice if
necessary.
When the Toner bottle becomes empty, the message [Ready to print / Please add toner] is displayed on the
[MACHINE] screen.
Tips
The toner storage contains extra toner to prevent printing from being stopped during job processing when the toner
bottle becomes empty.
When the toner storage also becomes empty, the message [No toner / Please add toner] is displayed. Follow the below
steps to replace the toner bottle.
bizhub PRO 1100
6
6-1