Using The Network Twain Scanner Function; Scanning Originals - Ricoh IS300e Operating Instructions Manual

Using the Network TWAIN Scanner Function

Scanning Originals

This section explains how to scan
originals using the network TWAIN
scanner function.
A A A A
Start DeskTopBinder V2 Lite, and
then select the scanner driver.
A On the [Start] menu, point to
[Program], point to [DeskTop-
Binder V2], and then click [Desk-
TopBinder V2].
B Click [Scanner Settings...] on the
[Tools] menu.
If the scanner is already select-
ed, no scanner settings are nec-
5
essary. Check the settings in the
[File format for scanned image(s)]
area, and then proceed to step
E.
C Click [Select Scanner Driver...].
D Select the name of the machine
you want to use in the [Source]
list, and then click [Select...].
E Click [OK].
B B B B
Place the original in the scanner.
Reference
⇒ p.109 "Setting Originals"
C C C C
Make the scan settings.
A On the [File] menu, point to
[Add Document], and then click
[Scan...].
The TWAIN driver starts.
After a short while, the dialog
box of the TWAIN driver that
operates the scanner appears.
This dialog box is called the
Scanner Properties dialog box.
Note
❒ For advanced settings, click
[Detail] to display the Detail
120
Note
❒ The name of the scanner cur-
rently being used is shown
on the title bar of the dialog
bo x. W h en m ult iple m a -
chines are connected, make
sure that the indicated ma-
chine is the machine you
want to use. If it is different,
click [Select Scanner] to select
the scanner again.
❒ If the machine you want to
use is not displayed in the
list, make sure that the IP ad-
dress is configured and that
the machine is correctly con-
nected to the network. If the
machine is still not displayed
in the list after confirming
the above, consult with your
network administrator.
B Depending on the type of orig-
inal or the objective for scan-
ning, click the appropriate
button in [Mode].
• [Standard] is suitable for
scanning standard originals
that are comprised of mainly
text.
• [Photo] is suitable for scan-
ning originals that include
photos, shaded illustrations,
etc.
• [OCR] is suitable for conver-
sion processing with an OCR
(Optical Character Reading)
application after scanning
the original.
• [Filing] is suitable for use
with filing applications, etc.
window. For information
about the Detail window, see
TWAIN driver Help.