Ricoh IS300e Operating Instructions Manual page 135

• When the message "
" is displayed on the
with PC...
display panel, the machine is used
from a client computer, and scan-
ning is in progress. Wait until the
job now in progress ends.
• When the message "
with PC... Set original(s)
and select the settings from
" is displayed on the dis-
the PC.
play panel, the machine is stand-
ing by for the network TWAIN.
Press [Exit].
If there are no [Exit], the Network
TWAIN exclusive standby screen is
displayed. Set [7.Select Method] (in
[2.Send Scan Settings] under the Scan-
n e r F e a t u r e s m e n u ) t o " S e n d
File/TWAIN ", and then restart the
machine.
• When a send file path name is dis-
played at the second line of the
screen, the standby screen for [En-
ter Custom Send File] is displayed. In
this case, press [PrevMenu].
Connecting
Connecting
Before Sending Scan Data
6
127