Ricoh IS300e Operating Instructions Manual page 195

When you use a hub
A Connect a straight network ca-
ble to the network interface
connector of this machine.
B Connect the other end of the
cable to an available connector
of the hub.
C Confirm that the computer is
connected to the hub B B B B .
When not connected, connect
the computer to the hub using a
1 0 B A S E - T o r 1 0 0 B A S E - T X
straight network cable.
B B B B
Change the computer's IP address
to 192.168.1.3, and subnet mask to
255.255.255.0.
C C C C
Restart the computer.
The computer's IP address is
changed to 192.168.1.3.
D D D D
Press the { { { { User Tools} } } } key on this
machine.
The scanner Features menu ap-
pears.
E E E E
Press the { { { { 1} } } } key.
The System Settings menu is dis-
played, and "1. Function Priority "
appears as the setup item currently
selected.
F F F F
Press [Next].
"1. IP Address " input screen will
appear.
"2. IP Address " appears as the set-
up item currently selected.
ADG004S
G G G G
Press [OK].
H H H H
Enter "192.168.1.2" with the number
keys.
Note
❒ Input each part of the IP address
in three digits.
❒ You can use { { { { 1 1 1 1 } } } } (or { { { { #} } } } ) and
{ { { { 0 0 0 0 } } } } keys to move the high-
lighting to right and left.
❒ You can use the { { { { Clear/Stop} } } } key
to clear the three-digit number
currently highlighted.
I I I I
Press [OK].
ABK006S
This returns to the System Settings
menu.
J J J J
Press [↓ ↓ ↓ ↓ Next].
"3. Subnet Mask " appears as the
setup item currently selected.
Using Wireless LAN
187
11