Ricoh IS300e Operating Instructions Manual page 62

Configuring the Scanner Settings
❖ ❖ ❖ ❖ Network Boot
Use this item to select whether you
use this machine on a DHCP envi-
ronment or not. Set this item to "
NONE " when a fixed IP address is
assigned to this machine on the
network you use. Set this item to "
DHCP " when you use this ma-
chine on a DHCP environment.
Note
❒ If you plan to use delivery serv-
3
er function, assign an IP address
of this machine statistically,
even when you use this ma-
chine on a DHCP environment.
You still have to select " DHCP
" for [Network Boot], and do not
enter any value to the following
setup items: [IP Address], [Subnet
Mask], [Default Gateway Address].
❒ After you have changed the set-
ting of this item, turn off the
power and then back on to acti-
vate the change.
❖ ❖ ❖ ❖ DNS Server 1 IP Address
Specify the IP address of the pri-
mary DNS server on the network
you use this machine, in the form
of xxx.xxx.xxx.xxx (xxx:0 through
255).
Note
❒ This setting can only be config-
ured using the Web Status Mon-
itor.
❖ ❖ ❖ ❖ DNS Server 2 IP Address
When a secondary DNS server
runs on the network you use this
machine, specify the IP address of
the secondary DNS server in the
form of xxx.xxx.xxx.xxx (xxx:0
through 255).
Note
❒ This setting can only be config-
ured using the Web Status Mon-
itor.
54
❖ ❖ ❖ ❖ DNS Server 3 IP Address
When a third DNS server runs on
the network you use this machine,
specify the IP address of the third
D N S s e r v e r i n t h e f o r m o f
xxx.xxx.xxx.xxx (xxx:0 through
255).
Note
❒ This setting can only be config-
ured using the Web Status Mon-
itor.
❖ ❖ ❖ ❖ Delivery Server IP Address
This item is automatically config-
ured when you register this ma-
chine to a delivery server operated
by ScanRouter V2 Profession-
al/Lite. Do not specify this item
manually.
❖ ❖ ❖ ❖ Transmission Speed
Use this item to select a network
transmission speed from "Auto",
"100Mbps" or "10Mbps" when
you connect this machine to a net-
work using a cable.
❖ ❖ ❖ ❖ LAN Type
Use this item to select the type of
LAN from the following options.
• Ethernet
Select this option when you
connect this machine to a net-
work using a cable.
• IEEE 802.11b
Select this option when you
connect this machine to a net-
work using an optional wireless
LAN card.
Note
❒ After you have changed the set-
ting of this item, turn off the
power and then back on to acti-
vate the change.