Ricoh IS300e Operating Instructions Manual page 47

Reference
There are three types of setup items: 1) items that you can configure settings
using the control panel of this machine, 2) items that you can configure set-
tings using a Web browser on a client computer, 3) items that you can config-
ure settings using both of the above. See p.41 "Initial Scanner Setup" for
details.
This manual covers only the setting procedures that you can perform using
the control panel of this machine. For details about settings this manual does
not cover, see the Web Status Monitor Help. For information about how to
view the Web Status Monitor, see p.84 "Accessing the Scanner"
Install ScanRouter V2 Professional/Lite on a
computer used as a network delivery server,
and make necessary settings
Install DeskTopBinder V2
Lite on a client computer, and make necessary
Configure [1.System Settings] on this ma-
Configure [General Settings] on the Web Status
Configure [2.SendScan Settings] and [4.Scan
Settings] on this machine or on the Web Status
Configure [Delivery Settings] on the Web Status
Recall the Settings on the Web Status Monitor
Register this machine
Professional/Lite
*1
Enter the IP address directly using [Set I/O Device].
settings
chine
Monitor
Monitor
Monitor.
*1
using ScanRouter V2
Outline to Use the Network Delivery
See the manuals for ScanRouter V2
Professional/Lite or ScanRouter V2
Professional/Lite Help.
See DeskTopBinder V2 Lite Help or
the manuals for DeskTopBinder V2
Lite.
See p.52 "System Settings"
See the Web Status Monitor Help.
See p.59 "Scanner Settings"
See the Web Status Monitor Help.
See p.98 "Recalling the Settings" for
details.
See the manuals for ScanRouter V2
Professional/Lite or ScanRouter V2
Professional/Lite Help.
3
39