Ricoh IS300e Operating Instructions Manual page 154

Sending Scan File by Scan to Folder
Reference
When you place the original on the exposure glass, see p.136 "To start with
an original on the exposure glass".
When scanning finishes properly, the file is sent to the shared folder. m ap-
pears at the upper right of the screen while the file is sent.
Note
❒ You cannot perform operations on this machine while m is displayed.
G G G G
Press [PrevMenu].
The display of this machine returns to the standby screen that had been dis-
played before you started the [Enter Custom Send File] operation.
Note
❒ Be sure to press [OK] to go back to a standby screen on this machine before
performing another [Enter Custom Send File] operation. If you start another
[Enter Custom Send File] operation without displaying a standby screen on
the machine, the message "
Scanner is currently in use. Please try again later.
7
on the Web Status Monitor.
146
Unable to make configurations because
" appears