Ricoh IS300e Operating Instructions Manual page 85

B Use the { { { { 1 1 1 1 } } } } and { { { { 0 0 0 0 } } } } keys to
highlight the item you want to
i n p u t , a n d t h e n u s e t h e
number keys to input the val-
ue.
Note
❒ To correct the number you
have entered, use the { { { { 1 1 1 1 } } } }
and { { { { 0 0 0 0 } } } } keys to highlight it,
and then press the { { { { Clear
/ S t o p } } } } k e y t o c l e a r t h e
number.
❒ You can also use the { { { { #} } } } key
as well as the { { { { 1 1 1 1 } } } } and { { { { 0 0 0 0 } } } }
keys to move selection.
C Press [OK].
This saves the setting you have
entered, and returns to the De-
fault Scan Settings menu.
Note
❒ Pressing [Cancel] discards the
values you have entered, and
returns to the Default Scan
Settings menu.
M M M M
Press [Next].
"4. Image Density " appears as the
setup item currently selected.
N N N N
Press [OK].
The setting screen for "4. Image
Density " appears.
Registering Scan Settings
O O O O
Use the { { { { 1 1 1 1 } } } } and { { { { 0 0 0 0 } } } } keys to
highlight the setting you want.
P P P P
Press [OK].
This saves the setting you have se-
lected, and returns to the Default
Scan Settings menu.
Note
❒ Pressing [Cancel] discards the
selected setting, and returns to
the Default Scan Settings menu.
Q Q Q Q
By pressing [Next] to display "5.
Erase Colour " through "11. Orig-
inal Settings " as the setup item,
select options for each of them in
the same way that you have done
D D D D
in steps through
R R R R
After all the settings are the way
you want, press [PrevMenu].
This registers the Scan Settings you
have configured to the " Default "
memory area, and returns to the
Scan Settings menu.
S S S S
While the Scan Settings menu is
displayed, press { { { { 2} } } } , { { { { 3} } } } or { { { { 4} } } }
key to display a corresponding
User Scan Settings menu.
For example, press the { { { { 2} } } } key to
display the User 1 Scan Settings
menu.
G G G G
.
77
3