Other Error Messages - Ricoh RDC-i700 Operation Manual

Error Messages Displayed on Setting Backup/Restoring Screen
Error Message
Backup failed
Input file parameter
File read Error
File restore Failed
File write Error

Other Error Messages

These error messages are displayed by the software, such as the expansion
functions, TWAIN driver, direct upload, etc.
Error Message
Other application is
accessing to the camera.
Would you like to wait?
Incompatible version of
NpxComm.dll. Please
reinstall.
Not connected to RDC-
i700. Please check
connection.
Timeout: Access to RDC-
i700 terminated.
Cannot read from Flash
Memory
Cannot write to Flash
Memory
Drive is not formatted
Failed to access to the
drive
This drive cannot be
formatted
166
Cause and Remedy
Failed to create backup file due to lack of memory,
etc. Close other applications and try again.
Attempted to restore settings without specifying file
name. Select file.
Invalid file selected. Select correct backup file.
Failed to restore backup file due to lack of memory,
etc. Close other applications and try again.
Storage memory (internal memory, PC card, CF
card) is full and recording process failed. Delete
unnecessary files or insert another storage
memory.
Cause and Remedy
More than one software attempted to send and
receive data with camera. Wait a short while.
Problem file installed. Reinstall RDC-i700 Explorer
Plug-In from CD-ROM supplied.
Camera not correctly connected. Check connection.
Camera not correctly connected. Check connection.
Insufficient memory in PC. Reboot PC and perform
operation without starting up other applications.
Specified drive, folder or file already erased.
Specified drive unformatted. Format.
Error has occurred in sending and receiving data
with PC. Restart camera.
Specified drive cannot be formatted. Restart
camera and try again.