Ricoh RDC-i700 Operation Manual page 154

M Set [Direct Upload Route directory] and [Direct Upload Log file
name].
Direct Upload Route directory :
Specify the folder to receive the incoming file. If you wish to specify a folder on
the camera side, leave blank.
Direct Upload Log file name :
If you wish to make a log file (a record of connections and transmissions) for
Direct Upload, input the file name here. No log file will be made if there is no
entry.
• Setting of the port number, user name and password is not required.
Note
N Click on [Start].
Direct Upload is in standby status.
To use direct upload from outside the company, before leaving the company do
not forget to open this screen and click on [Open].
If you click on [Conceal], the window will be closed and the icon will be added
at the right end of the task bar. By clicking on the icon, you can display the
original window.
• If you want to change the settings after clicking on [Open], click on
Note
[Apply] (The settings will be applied in the standby status.).
Important
• When the dial-up server does not operate properly despite the correct
Note
configuration of the receiving PC for Direct Upload, check the dial-up
settings.
152
P.172 "Checking the Dial-Up Settings"