Ricoh RDC-i700 Operation Manual page 145

• If you have connected several items of TWAIN-compatible equipment,
Note
it is necessary to select which TWAIN equipment you will use before
performing the operation described on the previous page. Use the
function titled [Select TWAIN_32 Source...] or similar. In most cases,
this item is found next to [TWAIN_32...]. For further details, refer to the
operation manual for the application software.
• Depending on the connection method and conditions, the screen for
inputting the camera's IP address may be displayed. In this case, input
the IP address displayed on the camera's LCD monitor.
The screen for selecting the storage memory, folder and file will be displayed.
(Depending on the application software, there may be the additional procedure
of specifying the file format.)
D Select the storage memory and folder, and then select the image
you wish to download from the list of files displayed and click on
[Download].
The selected image will be downloaded and displayed on the screen.
• If you click on [Display] in the thumbnail area, you can check a
Note
compressed view of the selected image.
• If you attach a check mark to [Auto Preview], a compressed view of
the selected image will automatically be displayed.
• You can change the camera's IP address by clicking on [Properties].
6
143