Ricoh RDC-i700 Operation Manual page 170

Error Message
Insufficient memory:
Please close other
applications.
Cannot access
TWAIN ERROR
Failed to initialize
Windows Socket
Failed to receive Socket
Data
Failed to send Socket
Data
Failed to create Socket
Cannot find necessary
DLL
Cannot connect to RDC-
i700
Cannot communicate
with RDC-i700
Cannot transfer: this file
is either too large or
unknown format
Cannot read the file
No selected file
Set up RDC-i700
property
Select a signature file
Fail to transfer signature
file
Reconfirm connection
and retransfer
168
Cause and Remedy
Insufficient memory in PC. Reboot PC and perform
operation without starting up other applications.
Drive has not been ready to access, or folder or file
does not exist.
Error occurred in TWAIN.DLL. Reinstall TWAIN
driver from CD-ROM supplied.
• The TWAIN driver for Windows is found in
Note
the "RDC-i700 Explorer Plug-In folder"
Error occurred when creating Windows socket.
Reinstall WinSock.
Camera not correctly connected or set. Check
camera connection and settings.
Camera not correctly connected or set. Check
camera connection and settings.
• The TWAIN driver for Windows is found in
Note
the "RDC-i700 Explorer Plug-In folder"
Error occurred when creating Windows socket.
Reinstall WinSock. Reset port.
Failed to initialize software. Reinstall signature
transfer software from CD-ROM supplied.
• The TWAIN driver for Windows is found in
Note
the "RDC-i700 Explorer Plug-In folder"
Camera not correctly connected or set. Check
camera connection and settings.
Camera not correctly connected or set. Check
camera connection and settings.
Specified file not in format capable of being used as
signature. Select file in correct format.
Insufficient memory in PC. Reboot PC and perform
operation without starting up other applications.
Select BMP format file or GIF format file first and
than trausfer signature file.
IP address has not been set in RDC-i700. Set IP
address by opening RDC-i700 property by using
Internet Explorer.
Setting of transferring signature file has been set to
auto for all files. Select more than one signature
file.
RDC-i700 has not been correctly connected to a
PC. Check connection.