Ricoh RDC-i700 Operation Manual page 135

E For a LAN connection, click on the [IP Address] menu in the RDC-
7/i700 Mounter control panel and select [Set IP Address...]. Input
the figures displayed on the camera's LCD monitor (4 figures
separated by ".") and click [OK].
F Click on [Mount] for the storage memory you wish to connect.
The camera icon will be displayed on the desktop.
• If the storage memory has not been mounted, mount it first.
Note
• By designating the directory, you can change the folder mounted on
the desktop.
• If you are using a USB connection and you select [Auto Mount],
mounting will be performed automatically when the camera is
connected.
• If you are using a serial connection and transmission is unstable, try
setting a lower [Speed] on the RDC-7/i700 Mounter control panel.
You can then open, copy and erase the folders and files.
When you no longer need the connection, click on [Unmount] in the RDC-7/i700
Mounter control panel or drag the camera icon and drop it in the [Trash].
Important
• You can change the folder name in the storage memory using the
Note
RDC-7/i700 Mounter, but unless you change the file name based on
the DCF format, the folder will not be downloaded normally by the
camera. The folder name will not be recognized by the camera unless
it is in 3 figures followed by 5 letters, as in [100RICOH].
• If you change the folder name on the CF card using the RDC-7/i700
Mounter or use the CF card on another camera, the folder name may
become unreadable or the photographs saved on the card may not be
downloaded.
6
133