Ricoh RDC-i700 Operation Manual page 139

For Macintosh
A Connect the camera correctly to the PC and set the camera's
mode dial to [
B Select [RDC-7/i700 Mounter] from [Control Panels] in the Apple
menu.
The RDC-7/i700 Mounter window will be displayed.
C Click on [Set Prefs...].
• You can click on [Set Prefs...] if one of the storage memories has been
Note
mounted. If the storage memory has not been mounted, mount it first
(P.131).
• Depending on the connection method and conditions, the screen for
inputting the camera's IP address may be displayed. In this case, input
the IP address displayed on the camera's LCD monitor.
The selection screen will be displayed.
D Select [Restore Configuration File...].
The dialog box for selecting the file for downloading will be displayed.
E Select the file and then click on [Open].
The selected setting data is now transferred to the camera.
F Turn off the camera and turn it on again about 5 seconds later.
You can now use the camera with the transferred settings.
]. Then turn the camera and the PC on.
6
137