Installing The Application Software; For Windows - Ricoh RDC-i700 Operation Manual

Installing the Application Software

This section explains how to install the various application software for using
the camera.

For Windows

Install the application software for Windows.
Installing RDC-i700 Explorer Plug-In
A Check that the PC is turned on.
B Check that the CD-ROM supplied is inserted in the CD-ROM of the
PC.
C Double-click on [My Computer] and then double-click on the CD-
ROM. Next, double-click on the [Explorer_Plug-In] folder and
double-click on the [Disk1] folder.
D Double-click on [Setup.exe].
Installation of the RDC-i700 Explorer Plug-In software will start. Follow the
instructions displayed on the screen.
Important • When you have finished installation shown above, the software "RDC-
Note
i700 USB/ Serial Process" will be launced automatically everytime
Windows runs and the corresponding icon will be displayed on the
task bar. When you have exited this software in case of connecting
with a USB cable or serial cable, take note that the communication
between the camera and PC will not be established.
• If you choose custom installation, you can select and install Explorer
Note
Plug-In, Direct Upload, Signature transfer, TWAIN Driver, etc.
individually. With standard installation, all the application software is
installed.
16