Installing The Usb Driver; For Windows - Ricoh RDC-i700 Operation Manual

Installing the USB Driver

This section explains how to install the software for connecting the camera to
the PC by USB cable.
For Windows, follow these instructions only if connecting the camera to the PC
by USB cable. If connecting by serial cable or LAN, this procedure is not
necessary.
For Macintosh, follow these instructions if connecting the camera to the PC by
USB or serial cable. If connecting by LAN, this procedure is not necessary.
Important • Do not connect the camera to the PC until the software has been
Note
installed, otherwise installation will not proceed smoothly.
• When you have established a connection, click [Cancel] on a plug &
play window that appears and remove the USB cable.

For Windows

If you are using Windows, install the USB driver as follows.
A Turn the PC on.
When Windows is up and running, proceed to the next step.
B Insert the CD-ROM provided in the CD-ROM drive of the PC.
C Double-click on [My Computer] and then double-click on the CD-
ROM. Next double-click on the [USB_Drvs] folder.
D If using Windows 98, double-click on [Win98] and then double-
click on [Setup.exe].
If using Windows 2000, double-click on the [Win2000] folder and
then double-click on [Setup.exe].
14