Other Error Messages - Ricoh RDC-i500 Operation Manual

Error Messages Displayed on Setting Backup/Restoring Screen
Error Message
Backup failed
Input file parameter
File read Error
File restore Failed
File saving Error

Other Error Messages

These error messages are displayed by the software, such as the expansion
functions, TWAIN driver, direct upload, etc.
Error Message
Other application is
accessing to the camera.
Would you like to wait?
Incompatible version of
NpxComm.dll. Please
reinstall.
Not connected to
Camera. Please check
connection.
Timeout: Access to
Camera terminated.
Cannot read from Flash
Memory
Cannot write to Flash
Memory
Drive is not formatted
Failed to access to the
drive
Cause and Remedy
Failed to create backup file due to lack of memory,
etc. Close other applications and try again.
Attempted to restore settings without specifying file
name. Select file.
Invalid file selected. Select correct backup file.
Failed to restore backup file due to lack of memory,
etc. Close other applications and try again.
Storage memory (internal memory or CF card) is
full and recording process failed. Delete
unnecessary files or insert another storage
memory.
Cause and Remedy
More than one software attempted to send and
receive data with camera. Wait a short while.
Problem file installed. Reinstall RDC-i Software
from CD-ROM supplied.
Camera not correctly connected. Check connection.
If you remove the LAN cable and then replace it
before selecting [disconnect] from the Explorer's file
menu while camera and PC are connected, this
message will remain displayed and reconnecting
may not be established. In this case, establish
connection again with following steps.
•Turn camera off and on.
• Set mode dial to modes other than [
then back to [ ].
Camera not correctly connected. Check connection.
Insufficient memory in PC. Reboot PC and perform
operation without starting up other applications.
Specified drive, folder or file already erased.
Specified drive unformatted. Format.
Error has occurred in sending and receiving data
with PC. Restart camera.
](PC) and
163