Table of Contents
Advertisement
How to attach the lens protector
1
While pressing on the lens
protector lock on the back
of the camera in the
2
direction of arrow 1, align
the alignment points on
the camera and the lens
protector and slide it in.
2
Rotate the lens protector in
the direction of arrow 2
until it clicks.
u Caution
• Condensation may form inside the lens protector if the
camera is subjected to rapid temperature changes, such as
when moving from the cold outdoors (low temperature
environment) into a warm room (high temperature
environment). Remove the lens protector and wipe it all off
with a dry, lint-free cloth, and then put the lens protector back
on.
• To prevent the lens protector from being scratched by a hard
object, be sure to put the camera in a case such as the
optional camera case O-CC163 when carrying.
If the lens protector becomes dirty, remove dust or dirt with a
blower, and then gently wipe the lens protector with a soft
cloth.
12
Installing a memory card and
battery
2
1
Slide the lock lever in the
direction of 1 and release
the lock.
Slide the release latch in
the direction of 2 and
1
open the battery/card
cover.
2
Confirm the positive and
negative terminals of the
battery. While pressing the
battery lock lever outward
using the side of the
battery, insert the battery
correctly.
2
1
Advertisement
Table of Contents
