Go Power GP-SW2000 Manual page 7

Go Power! GP-SW2000, GP-SW1000 and GP-SW600
3.3 Front view GP SW-600:
a. ON /OFF Switch
b. Ventilation Ports
a) ON / OFF switch:
Power ON/OFF switch, leave in the OFF position during installation.
b) Ventilation Ports:
Do not obstruct, allow at least one inch for airflow.
c) Load Level:
Display AC load watts. Green indicates normal operation, yellow indicates mid or high
operation and red indicates overload levels.
d) Fault:
See Section 5 for LED variations in Fault mode.
e) Frequency:
Typical North American setting is 60 Hz.
f) Input Level:
Displays input voltage. Green indicates normal battery level, yellow indicates mid to
low battery level and red indicates under voltage.
g) AC Outlet: Ground Fault Protected (GFCI)
Outlet sockets available:
g. AC Outlet f. Input Level
c. Load Level
North America
Inverter Owner's Manual
e. Frequency
d. Fault
7