Changing The Video-Out Signal Method (Ntsc/Pal) - Ricoh CAMERA RDC-i500 Operation Manual

Changing the Video-out Signal Method (NTSC/PAL)

If you wish to play recorded files on a TV when you are abroad, change the
Video-out Signal Method according to the video system used in the country
where you are.
• "Playback Using a TV" (P.86) for instructions on how to connect the
See
camera to a TV
• "Using Your Camera in Other Countries" (P.133) for details of the TV
systems
A Set the mode dial to [
B Select [CAMERA SETTINGS] and
press the
C Select [VIDEO OUT MODE] and press
the button.
D Choose the video format (NTSC or
PAL) and then press the ENTER
button.
The video signal method will be changed and
the display will return to the Camera Settings
menu.
E Press the CANCEL button to return to
the Setup menu.
• Connecting the AV cable to the camera, when the signal method is set
Note
to PAL, produces the rough image on the LCD monitor.
114
].
button.