Table of Contents
Advertisement
Changing the Playback Method for Viewing on TV
(VIDEO OUT MODE)
You can view your still images and movies on a television screen by connecting your camera to a tele-
vision with the AV cable that came with your camera.
Your camera is set to NTSC video format (used in Japan and other countries) for use with television
equipment, etc. If the equipment you want to connect to uses PAL format (used in Europe and else-
where), then switch your camera to PAL format before connecting.
NTSC (Default)
PAL
To change the playback format, follow the
steps below.
Turn the Mode Dial to 1
The Setup Screen appears
Connecting the AV cable to the camera turns off the LCD monitor display.
For how to view still images on your television screen, see P.100.
1 (Setup Mode).
1
1
Chapter 1 Section 7 Changing Camera Settings
Press the " " " " button to select [VIDEO OUT
MODE].
Press the #$
desired setting.
This setting will be used until you change it.
130
#$ buttons to select the
#$
#$
Advertisement
Table of Contents
