Changing The Display Language; Changing The Video-Out Signal Method (Ntsc/Pal) - Ricoh Camera RDC-i700 Operation Manual

Changing the Display Language

The choice of language to display the information on the LCD monitor can be
selected.
A Set the mode dial to [
B Select [LANGUAGE].
C Choose the language and select [OK].
The display will return to the Setup menu.
• Only the selectable language will be displayed.
Note
• To save the language setting, enable the keep settings mode.
P.116 "Keep Settings"

Changing the Video-out Signal Method (NTSC/PAL)

If you wish to play recorded files on a TV when you are abroad, change the
Video-out Signal Method according to the video system used in the country
where you are.
• "Playback Using a TV" (P.88) for instructions on how to connect the
See
camera to a TV
• "Using This Camera Abroad" (P.135) for details of the TV systems
A Set the mode dial to [
B Select [VIDEO OUT MODE].
].
].
5
119