Changing The Exposure Metering System - Ricoh CAMERA RDC-i500 Operation Manual

C Choose the ISO sensitivity [AUTO,
ISO 200, ISO 400 or ISO 800] and then
press the ENTER button.
D Press the CANCEL button to exit the
menu display.
The selected ISO sensitivity will be displayed
on the LCD monitor.
E Press the shutter release button to
record the image.
• Enable the keep settings mode to save the ISO sensitivity setting.
Note
P.108 "Keep Settings"

Changing the Exposure Metering System

(Photometry)
You can change the exposure metering system to record images.
Mode
MULT
(multi-pattern)
CTR WGHT
(center weighted)
SPOT
(spot)
A Set the mode dial to [
the MENU button.
B Select [PHOTOMETRY] and press the
button.
76
Description
Multi-metering is performed by splitting the LCD monitor in
several parts. This mode is also suitable for shooting the
backlighted subject.
The middle of the LCD monitor is the focal point, and the
light is measured uniformly over the whole screen.
Exposure metering is performed of a part of the frame in the
middle of the LCD monitor. This mode is used when the
subject is exposed to strong light, such as backlight.
] and press