Setting The Power Saving Mode - Ricoh CAMERA RDC-i500 Operation Manual

Setting the Power Saving Mode

This function enables you to reduce the power consumption of the LCD monitor
and extend the life of the battery.
A Set the mode dial to [
B Select [CAMERA SETTINGS] and
press the
C Select [POWER SAVE] and press the
button.
D Select [ON] or [OFF] and then press
the ENTER button.
The screen will return to the Camera Settings
menu.
E Press the CANCEL button to return to
the Setup menu.
• When the power save mode is set to ON, focusing will take more or
Note
less time than using the LCD monitor. Take care when focusing
through the viewfinder.
112
].
button.