Close-Up Shooting; Remote Control - Ricoh CAMERA RDC-i500 Operation Manual

Ricoh camera operation manual rdc-i500
Hide thumbs Also See for CAMERA RDC-i500:
Table of Contents

Advertisement

E Decide the composition of the
picture, position the camera securely,
and press the shutter release button.
The self-timer LED will light and the self-timer
will start. The shutter will be released after
about 10 seconds. The self-timer LED will
start blinking about 2 seconds before the
shutter is released and the beep sound will
be heard.
The self-timer mode is canceled
automatically when the shutter is released.
• If the flash is charging, the self-timer will start when charging is
Note
completed.
• The focus is locked when the shutter release button is pressed.

Remote Control

Tips
To operate the camera from a remote position or when the camera is
fixed in one spot, use the optional remote control unit.
Close-up Shooting (Macro Mode)
Macro mode allows you to take a close-up picture of a subject. Use this mode
when the distance to the subject is less than about 24 cm.
A Set the mode dial to one of the
following: [
the
button.
• Continuous shooting can be used in
Note
macro mode.
Shooting (Continuous Shooting
Mode)"
The
symbol will be displayed on the LCD
monitor.
• To cancel the macro mode, press
Note
the
,
or
] and press
P.52 "Continuous
button again.
3
63

Advertisement

Table of Contents
loading

Table of Contents