4U Pcie Riser Power Cable Assembly Replacement - Lenovo ThinkSystem SR860 Maintenance Manual

Figure 149. 4U PCIe riser card installation
After installing a 4U PCIe riser card, complete the following steps:
1. Install the 4U PCIe riser assembly (see "Install a 4U PCIe riser assembly" on page 153).
2. Install the top cover (see "Install the top cover" on page 148).
3. If the server is installed in a rack, reinstall the server into the rack.
4. Power on the server and any peripheral devices.

4U PCIe riser power cable assembly replacement

Use this procedure to install or remove a 4U PCIe riser power cable assembly.
Remove a 4U PCIe riser power cable assembly
Use this procedure to remove a 4U PCIe riser power cable assembly.
Before removing a 4U PCIe riser power cable assembly:
1. Read the safety information and installation guidelines (see "Safety" on page iii and "Installation
Guidelines" on page 59).
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables (see
"Power off the server" on page 10).
3. If the server is installed in a rack, remove the server from the rack.
4. Remove the top cover (see "Remove the top cover" on page 146).
5. Remove the PCIe expansion tray (see "Remove the PCIe expansion tray" on page 149).
To remove a 4U PCIe riser power cable assembly, complete the following steps:
.
Chapter 3 Hardware replacement procedures
159