Rear View - Lenovo ThinkSystem SR860 Maintenance Manual

Table 6. Options available on the front operator panel (continued)
Actions

Rear view

This section contains information about the LEDs and connectors on the rear of the server.
The following illustrations show the connectors and LEDs on the rear of the server.
There are two sections show the different components on the rear server, see section "Connectors and LEDs
on the rear server" on page 20 and section "Expansion slots on the rear server" on page 22 for more
information.
• XX is the temperature.
• YYY is the AC voltage.
• ZZ is the wattage.
Actions provides the following available actions, which come in effect by pressing and
holding on the select button for three seconds:
• Restore XCC default settings is displayed as following:
RESTORE XCC DEFAULTS?
HOLD v FOR 3s
• Restart XCC is displayed as following:
REQUEST XCC HARD RESET?
HOLD v FOR 3s
• Request XCC physical presence is displayed as following:
REQUEST XCC PHY. PRES.?
HOLD v FOR 3s
• Clear CMOS is displayed as following:
CLEAR CMOS?
HOLD v FOR 3s
Note: This action is only available when the system power is off.
• System reboot is displayed as following:
SYSTEM RESET BUTTOM?
HOLD v FOR 3s
.
Chapter 2 Server components
19