Rcloscal Recall Open/Short Average; Figure 7-221 Rcloscal Syntax - Agilent Technologies 8560E User Manual

RCLOSCAL Recall Open/Short Average

Syntax
Figure 7-221 RCLOSCAL Syntax
Description
The RCLOSCAL command recalls the internally stored open/short
average reference trace into trace B. The instrument state is also set to
the stored open/short reference state.
Example
The following example applies only to an 8560E/EC Option 002.
However, the RCLOSCAL command can be used on the 8560 E-Series
and EC-Series spectrum analyzers when they are being used with an
Agilent 85640A tracking generator, or an Agilent 85644A/645A tracking
source.
10
20
30
40
50
60
70
E."
80
90
100
110
120
130
TO STORE AND AVERAGE."
140
150
Chapter 7
OUTPUT 718;"IP;SNGLS;"
OUTPUT 718;"FA 300 KHZ;FB 1GHZ;"
OUTPUT 718;"SRCPWR ON;"
OUTPUT 718;"SWPCPL SR;"
OUTPUT 718;"SRCTKPK;DONE?;"
ENTER 718;Done
PRINT "CONNECT OPEN.
PAUSE
OUTPUT 718;"TS;DONE?;"
ENTER 718;Done
OUTPUT 718;"STOREOPEN;TS;DONE?;"
ENTER 718;Done
PRINT "CONNECT SHORT.
PAUSE
OUTPUT 718;"STORESHORT;TS;DONE?;"
RCLOSCAL Recall Open/Short Average
PRESS CONTINUE WHEN READY TO STOR
PRESS CONTINUE WHEN READY
Language Reference
573