Figure 3-7
CAL Key Menu Tree
*
†
‡
§
Chapter 3
Changes to STOP ADJUST if FULL IF ADJ is pressed.
Changes to STORE REF LVL if REF LVL ADJ is pressed.
These functions are only available with firmware revisions >930809.
CRT ADJ PATTERN
The
key activates a pattern on the screen which is used
for adjusting the quadrature of the display. This pattern will appear in both
E-series and EC-series instruments. However, EC-series instruments do not
require adjustment and are not adjustable.
Softkey Menus
Menu Trees
171