Agilent Technologies 8560E User Manual page 190

Key Function Descriptions
Key Function Tables
Table 4-2 Instrument State Functions
Instrument State
Keys
DATECODE OPTIONS
DELETE CORR PT
DEMOD TIME
DONE EDIT
EDIT AMPCOR
EDIT AMPL
EDIT FREQ
ELAPSED TIME
EXIT RESTORE
EXIT ACP
EXIT AMPCOR
EXT MXR PRE UNPR
EXTERNAL MIXER
FACTORY PRSEL PK
FFT MEAS
FM DEMOD ON OFF
FRAC N FREQ
FREQ DIAGNOSE
190
Description
Access Key
CONFIG Displays the analyzer firmware datecode, its
instrument serial number, its model number, and any
options present. EC-series instruments also appear as
Option 007 instruments (Option 007 is the FADC
option, which is standard in EC-series instruments).
CAL Ampcor function which deletes a single correction
point.
AUX CTRL Selects the duration of demodulation between
successive sweeps.
Exits the ampcor menu that is used for editing
CAL
correction points.
Allows you to edit the amplitude correction points.
CAL
CAL Allows you to edit the amplitude of an ampcor
correction point.
Allows you to edit the frequency of an ampcor
CAL
correction point.
Displays the cumulative operating time of the
RECALL
analyzer.
MEAS/USER Exits the ACP menu turning off the function and
restoring the previous spectrum analyzer state.
MEAS/USER Exits the adjacent channel power measurement menu.
Exits the amplitude correction menu.
CAL
CONFIG Selects either preselected or unpreselected external
mixing mode. (Non-functional in Option 327.)
AUX CTRL Accesses a menu of external-mixer functions.
(Non-functional in Option 327.)
RECALL Restores the factory preselector-peaking data as the
current preselector data.
Performs a discrete Fourier transform on the input
MEAS/USER
signal, converting zero-span information into the
frequency domain.
Switches FM demodulation on and off.
AUX CTRL
CAL Displays the fractional N frequency corresponding to
the current start frequency.
CAL Accesses a menu of diagnostic functions which allow
the value of various internal parameters to be
retrieved.
Chapter 4