Agilent Technologies 8560E User Manual page 189

Table 4-2 Instrument State Functions
Instrument State
Keys
CAL THR
CARRIER PWR MENU
CH EDGES → ∆MKR
CHAN DN
CHAN PWR OVER BW
CHAN UP
CHANNEL
BANDWDTH
CHANNEL PWR MENU
CHANNEL SPACING
CHPWR BW [ ]
CNV LOSS VS FREQ
COLOR
CONFIG
CONT MEASURE
COPY
COPY DEV PRNT PLT
CRT ADJ PATTERN
Chapter 4
Description
Access Key
AUX CTRL Stores thru calibration in trace B and in instrument
state register 9.
MEAS/USER Accesses carrier power measurement functions.
Moves the marker locations to the channel edges, for
MEAS/USER
an occupied power measurement.
Moves the center frequency down (lower) by one
MEAS/USER
channel spacing.
MEAS/USER Calculates the power in the channel power bandwidth.
Moves the center frequency up (higher) by one channel
MEAS/USER
spacing.
Sets the channel bandwidth for an adjacent channel
MEAS/USER
power (ACP) measurement.
MEAS/USER Accesses the channel power measurement functions.
MEAS/USER Sets the spacing between channels for an adjacent
channel power (ACP) measurement.
Sets the channel power bandwidth for adjacent
MEAS/USER
channel power (ACP) measurements.
Displays the conversion loss for a specific frequency in
AUX CTRL
the current band.
CONFIG Selects the HP PaintJet or compatible color printer
configuration for use with COPY.
— Accesses a menu of functions used to configure a
plotter and a printer as hard-copy devices, sets the
spectrum analyzer GPIB address, and views the
instrument datecode and options.
Sets the measurements so that they run continuously.
MEAS/USER
— Copies the display contents onto a plotter or a printer.
Selects a printer or a plotter as the hard-copy device
CONFIG
used with COPY.
CAL Displays an alignment pattern which is used in
conjunction with X POSN, Y POSN, and TRACE
ALIGN adjustments on E-series instruments.
EC-series instruments do not require adjustment and
are not adjustable.
Key Function Descriptions
Key Function Tables
189