Agilent Technologies 8560E User Manual page 233

Agilent technologies 8560 e-series and ec-series spectrum analyzers

Table of Contents

Selects the positive-peak detector mode. Used to detect

the positive-peak noise level of a trace. This is the

detector selected by MAX HOLD.

Front-panel key access:

Sets the detector to sample mode. This mode is used

with the video averaging and marker noise functions,

as well as for the combination of resolution bandwidths

greater than or equal to 300 Hz and video bandwidths

less than or equal to 100 Hz. Note that when the

resolution bandwidth is not much greater than the

display resolution, the peak responses can be missed

when the video signal is sampled.

Front-panel key access:

Accesses the keys that control the display including

setting the intensity and focus, turning the display line

and threshold line on and off, turning the graticule and

annotation on and off, and entering a screen title.

Front-panel key access:

Delays the start of the sweep until the speciﬁed time

elapses after the trigger event. With Option 007 the

delay can be set to start the sweep before the trigger

event, when using sweep times <30 ms. The second line

of the softkey indicates the current setting of the sweep

delay. This function is useful when making gated

measurements.

Front-panel key access:

Turns on and off the function that delays the start of

the sweep until after the trigger event. With Option 007

the sweep can be started before the trigger event.

Useful when making gated measurements.

Front-panel key access:

Exits the ampcor edit menu and returns to the ampcor

Front-panel key access:

Key Function Descriptions

Key Descriptions