Figure 2-16
Peak of Signal is Positioned at Reference Level for Maximum
Accuracy
Place a second marker on the second harmonic
1. Set the peak threshold above the noise:
2. Activate the second marker:
This places the anchor marker on the fundamental, and a second
marker on the peak of the second harmonic, as shown in Figure 2-17 on
page 70.
Chapter 2
a. Press
PEAK SEARCH
b. Adjust the dashed line to a level above the noise using either the
step keys or the knob.
a. Press
PEAK SEARCH
,
,
MORE 1 OF 2
PEAK THRESHLD
,
,
MARKER DELTA
NEXT PK RIGHT
Making Measurements
Example 4: Harmonic Distortion
.
.
69