Figure 1-6 20 Mhz Frequency Span; Figure 1-7 Activated Normal Marker - Agilent Technologies 8560E User Manual

Figure 1-6 20 MHz Frequency Span
3. Activate the marker.
a. Press
b. If the marker is not on the peak of the signal, it can be placed on
Figure 1-7 Activated Normal Marker
Chapter 1
, which is located in the MARKER section of the front
MKR
panel. This activates the normal marker and places it at the
center of the trace (in this case, at or near the peak of the signal).
The marker reads both the frequency and the amplitude, and
displays these values in the active function block. In this case, the
marker reads 300.00 MHz and −10.00 dBm, as shown in Figure
1-7 on page 33.
the highest point by pressing
to move the marker manually.
Making a Basic Measurement
, or by using the knob
PEAK SEARCH
Quick Start Guide
33