Copyright; Specified Application - KEB COMBIVERT F5 Installation Manual

Preface
Tests can only be done within the application by the machine manufacturer. They must
be repeated, even if only parts of hardware, software or the unit adjustment are modi-
fied.
Unauthorised opening and tampering may lead to bodily injury and property damage and
may entail the loss of warranty rights. Original spare parts and authorized accessories by the
manufacturer serve as security. The use of other parts excludes liability for the consequences
arising out of.
The suspension of liability is especially valid also for operation interruption loss, loss of profit,
data loss or other damages. This is also valid, if we referred first to the possibility of such
damages.
If single regulations should be or become void, invalid or impracticable, the effectivity of all
other regulations or agreements is not affected.
Due to the multitude of possible applications not every possible case of installation, operation
or maintenance can be considered. If you require further information or if special problems
arise which are not treated in detail in the documentation, you can request the required infor-
mation from the local agency of the company Karl E.Brinkmann GmbH.
1.4

Copyright

The customer may use the instruction manual as well as further documents or parts from it for
internal purposes. Copyrights are with KEB and remain valid in its entirety.
KEB , COMBIVERT
®
E. Brinkmann GmbH.
Other wordmarks or/and logos are trademarks (™) or registered trademarks (®) of their re-
spective owners and are listed in the footnote on the first occurrence.
When creating our documents we pay attention with the utmost care to the rights of third par-
ties. Should we have not marked a trademark or breach a copyright, please inform us in order
to have the possibility of remedy.
1.5 Specified application
The used semiconductors and components of Karl E. Brinkmann GmbH are developed and di-
mensioned for the use in industrial products. If the KEB COMBIVERT F5 is used in machines,
which work under exceptional conditions or if essential functions, life-supporting measures or
an extraordinary safety step must be fulfilled, the necessary reliability and security must be
ensured by the machine builder.
The operation of our products outside the indicated limit values of the technical data leads to
the loss of any liability claims.
GB -6
, COMBICONTROL
®
and COMBIVIS are registered trademarks of Karl
® ®