Table of Contents
Advertisement
Touchpad assembly
Table 5-12
Touchpad and cable descriptions and part numbers
Description
Touchpad assembly
NOTE:
The touchpad cable is available in the Cable Kit as spare part number L45087-001.
Before removing the touchpad assembly, follow these steps:
1.
Prepare the computer for disassembly
2.
Place the computer in Battery Safe mode
3.
Remove the bottom cover
4.
Remove the battery
Remove the touchpad assembly:
1.
Disconnect the cable from the ZIF connector on the touchpad (1).
2.
Lift the silver tape from the touchpad (2).
3.
Remove the six broad head Phillips M2.0 × 2.0 screws (3) that secure the touchpad to the computer.
4.
Remove the touchpad from the computer (4).
Reverse this procedure to install the touchpad assembly.
(Preparation for disassembly on page
(Battery Safe mode on page
(Bottom cover on page
(Battery on page
30).
28).
29).
Component replacement procedures
Spare part number
L77267-001
28).
45
Advertisement
Table of Contents
