Cisco 4451 ISR Hardware Installation Manual page 89

Install and Connect Cisco 4000 Series ISRs
This chapter describes how to install and connect Cisco 4000 Series Integrated Services Routers (ISRs)
to LAN, WAN, and Voice networks. The following sections provide technical details.
•
Install the Router, page 3-4
•
Chassis Grounding, page 3-19
•
Connect Power, page 3-20
•
Connect to Console Terminal or Modem, page 3-22
•
Install Cisco Microsoft Windows USB Device Driver, page 3-24
•
Uninstall Cisco Microsoft Windows USB Driver, page 3-26
•
Connect WAN, LAN, and Voice Interfaces, page 3-27
Warning
To see translations of the warnings that appear in this publication, see the
Safety Information for the Cisco 4000 Series ISRs
should be allowed to install, replace, or service this equipment. Statement 1030
Warning This unit might have more than one power supply connection. All connections must be removed
to de-energize the unit. Statement 1028
Blank faceplates and cover panels serve three important functions: they prevent exposure to
Warning
hazardous voltages and currents inside the chassis; they contain electromagnetic interference
(EMI) that might disrupt other equipment; and they direct the flow of cooling air through the
chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are
in place. Statement 1029
Hazardous network voltages are present in WAN ports regardless of whether power to the unit
Warning
is OFF or ON. To avoid electric shock, use caution when working near WAN ports. When
detaching cables, detach the end away from the unit first. Statement 1026
OL-32185-02
document. Only trained and qualified personnel
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
3
C H A P T E R
Regulatory Compliance and
3-1