Installing Network Modules And Interface Cards - Cisco MWR 1941-DC - 1941 Mobile Wireless Router Hardware Installation Manual

Installing the Router
This chapter describes how to install your Cisco MWR 1941-DC router and connect it to networks and
external devices. It contains the following sections:
•
•
•
•
•
•
•
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning

Installing Network Modules and Interface Cards

Cisco routers are normally shipped with network modules, voice and WAN interface cards (VWICs), and
WAN interface cards (WICs) already installed. If you need to remove or install any of these items, refer
to the applicable documents online.
For network modules:
•
•
For VWICs:
•
78-15827-06B0
Installing Network Modules and Interface Cards, page 3-1
Rack Mounting the Chassis, page 3-2
Connecting the Console Terminal and Modem, page 3-3
Connecting the Network Cables, page 3-5
Connecting the MWR 1941-DC Router to a DC-Input Power Supply, page 3-10
Replacing or Upgrading the CF, page 3-13
What to Do After Installing the Hardware, page 3-20
Quick Start Guide: Network Modules for Cisco 2600 Series, Cisco 3600 Series, Cisco 3700 Series,
and Cisco MWR 1941-DC Routers
Cisco Network Modules Hardware Installation Guide
VWIC-2MFT-T1-DIR, VWIC-2MFT-E1-DIR Installation Instructions
Cisco MWR 1941-DC Mobile Wireless Edge Router Hardware Installation Guide
C H A P T E R
3
3-1