Install and Remove DDR DIMMs on Cisco 4400 or 4300 Series ISRs
Figure 6-21
Step 6
Insert the DIMM into the connector one side at a time.
a DIMM.
Figure 6-22
Step 7
Firmly press the DIMM into the connector until the latches close onto the DIMM. Ensure that both
latches rotate to the closed position against the DIMM. See
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
6-28
DIMM Showing Polarization Notch
Handle the DIMMs
Chapter 6
Install and Upgrade Internal Modules and FRUs
1
Figure 6-22
shows what to avoid while handling
Figure
6-23.
OL-32185-02