Remove Poe Power Supply Slot Filler; Figure - Cisco 4451 ISR Hardware Installation Manual

Chapter 6 Install and Upgrade Internal Modules and FRUs

Figure 6-40

Remove Bezel and Fan Tray to Locate PoE Slots
1
PoE converter power supply slot
3
Bezel

Remove PoE Power Supply Slot Filler

To remove a PoE power supply filler:
Step 1
Remove the bezel and fan tray from the router.
Step 2
Loosen the screws from the securing nuts on the chassis. See
Step 3
Gently pull out the filler from the filler tab on the chassis.
OL-32185-02
2
Fan tray
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
PoE Converter Power Supply Unit
1
2
3
Figure 6-41 for details.
6-55