Configure Snmp - HIKVISION DS-9616NI-I8 User Manual

Step 2 Check Enable.
Step 3 Configure NTP settings as need.

Interval (min): Time interval between two time synchronization with NTP server

NTP Server: IP address of the NTP server

NTP Port: Port of the NTP server
Step 4 Click Apply.

15.6 Configure SNMP

Purpose
You can configure SNMP settings to get device status and parameter information.
Before You Start
Download the SNMP software to receive device information via the SNMP port. By setting the trap
address and port, the device is allowed to send alarm events and exception messages to the
surveillance center.
Step 1 Go to System > Network > Advanced > SNMP.
Network Video Recorder User Manual
Figure 15-9 NTP Settings
163