HIKVISION DS-9616NI-I8 User Manual page 84

Step 4 Select the Group number for the current HDD.
Step 5 Click OK.
Regroup the cameras for HDD if the HDD group number is changed.
Step 6 Go to Storage> Storage Mode.
Step 7 Check Group tab.
Step 8 Select the group No. from the list.
Step 9 Check the checkbox to select the IP camera(s) to record/capture on the HDD group.
Step 10 Click Apply.
Reboot the device to activate the new storage mode settings.
Network Video Recorder User Manual
Figure 7-6 Storage Mode-HDD Group
83