Region Exiting Detection - HIKVISION DS-9616NI-I8 User Manual

Step 8 Click Apply.

12.6 Region Exiting Detection

Purpose
The Region Exiting Detection Function detects objects that exit from a pre-defined virtual region.
Step 1 Go to System > Event > Smart Event.
Step 2 Click Region Exiting.
Step 3 Select a camera to configure.
Step 4 Check Enable Region Exiting Detection.
Step 5 Optionally, check Save VCA Picture to save the captured region exiting detection pictures.
Step 6 Follow these steps to set the detection rules and detection areas.
1)
Select an Arming Region to configure. Up to 4 regions are selectable.
2) Drag the sliders to set Sensitivity.
Sensitivity: The higher the value is, the more easily the detection alarm will be triggered.
Its range is [0-100].
3) Click Draw Region and draw a quadrilateral in the preview window by specifying four vertices of
the detection region.
Step 7 Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Network Video Recorder User Manual
Figure 12-6 Region Exiting Detection
140