HIKVISION DS-9616NI-I8 User Manual page 70

Step 2 Set the video output interface to Channel-Zero.
Step 3 Go to System>Live View>Channel-Zero.
Step 4 Check Enable Channel-Zero Encoding.
Step 5 Configure the Frame Rate, Max. Bitrate Mode, and Max. Bitrate. The higher frame rate and
bitrate settings result in higher bandwidth requirement.
Step 6 Click Apply.
Result:
You can view all of the channels on one screen using the CMS or a web browser.
Network Video Recorder User Manual
Figure 5-5 Live View, Channel-Zero Encoding
69