How To Install The Remote Display Unit (Option) - Furuno SC-130 Operator's Manual

1. INSTALLATION
Note: To remove the SC-702 from the mounting
location, use the panel remover (FP19-01201,
included).
Flush mounting the SC-702 (with optional F Mount Panel)
Use the optional kit (OP24-35), referring to the outline drawings at the back of this
manual and the installation instructions (C42-01310) included with the optional kit.
1.4

How to Install the Remote Display Unit (option)

The RD-50/RD-20 can be connected as a ROTI (Rate Of Turn Indicator) display unit.
For installation instructions regarding the RD-50 or RD-20, see the appropriate oper-
ator's manual (RD-50: OME-44530-x, RD20: OME-44540-x; x denotes the manual
version), included with your Remote Display.
Note: If your vessel is required to be ROTI type-test compliant, use the RD-50.
1-10
Pull tab Pull tab
outwards outwards
Insert Insert