Furuno SC-130 Operator's Manual page 5

Safety instructions for the operator
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment unless
totally familiar with electrical circuits
and service manual.
Only qualified personnel should work
inside the equipment.
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury
can occur.
Turn off the power immediately if
water leaks into the equipment or
smoke or fire is coming from the
equipment.
Failure to turn off the equipment can
cause fire or electrical shock.
Contact a FURUNO agent for service.
Use the correct fuse.
A wrong fuse can cause fire or serious
damage to the equipment.
The TFT LCD is constructed using the latest LCD techniques, and displays 99.99% of its pixels. The
remaining 0.01% of the pixels may drop out or blink, however this is not an indication of malfunction.
WARNING LABEL
A warning label is attached to the Junction Box
(SC-701). Do not remove the label.
If the label is missing or damaged, contact a
FURUNO agent or dealer about replacement.
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
About the TFT LCD
SAFETY INSTRUCTIONS
CAUTION
No single navigation aid (including
this unit) should ever be relied
upon as the exclusive means for
navigating your vessel.
The navigator is responsible for
checking all aids available to confirm
his position. Electronic aids are
intended to assist, not replace, the
navigator.
WARNING
Unit: Junction Box (SC701)
Name: Warning Label (1)
Type: 86-003-1011-3
CodeNo.: 100-263-233-10
iii