Furuno SC-130 Operator's Manual page 90

3 ALERT
1 ALERT LIST
2 REMOTE ACK I/F (ACK , BUZZER STOP)*7
3 SOUND (OFF, SHORT, LONG , CONTINUOUS)*5
4 ALERT LOG
4 MAINTENANCE
1 INFORMATION
1 DISPLAY UNIT
2 ANTENNA UNIT
3 JUNCTION BOX
2 DIAGNOSTICS
1 MEMORY TEST
2 KEY TEST
3 LCD TEST
4 AUTOMATIC TEST
5 MANUAL TEST (For technical personnel only. Do not use.)
6 SOUND TEST
3 IMPORT/EXPORT
IMPORT USER SETTING
EXPORT USER SETTING
5 I/O
1 DATA 1
1 DATA OUTPUT (IEC/NMEA , RTCM*2)
2 OUTPUT FORMAT (IEC61162-1 ED.4 , IEC61162-1 ED.3, NMEA0183 V2.0, NMEA0183 V1.5)
3 TALKER*3 (GP, GL, GA, GN, HE , HN, HC) *3: Non-IMO only, fixed for IMO
4 BAUD RATE (4800bps, 9600bps, 19200bps, 38400bps ) *3 *4
5 SENTENCES
2 DATA 2
1 DATA OUTPUT (IEC/NMEA , RTCM*2)
2 OUTPUT FORMAT (IEC61162-1 ED.4 , IEC61162-1 ED.3, NMEA0183 V2.0, NMEA0183 V1.5)
3 TALKER (GP, GL, GA, GN, HE , HN, HC)
4 BAUD RATE (4800bps , 9600bps, 19200bps, 38400bps)
5 SENTENCES
3 DATA 3 (Same as DATA 2)
4 DATA 4 (Same as DATA 2)
5 DATA 5 (Same as DATA 2)
6 NETWORK
1 TALKER*6 (GP, GL, GA, GN, HE , HN, HC)
2 SENTENCES
3 IP ADDRESS/PORT
7 DATA SOURCE
1 HDG (INTERNAL LAN , DATA 1, DATA 2, DATA 3, DATA 4, DATA 5, USER PRIORITY)
2 EXT. STW*6 (DATA 1, DATA 2, DATA 3, DATA 4, DATA 5, USER PRIORITY )
8 I/O LOGS
1 DATA 1(Shows TX/RX log)
2 DATA 2(Shows TX/RX log)
3 DATA 3(Shows TX/RX log)
4 DATA 4(Shows TX/RX log)
5 DATA 5(Shows TX/RX log)
6 ETHERNET
7 CANbus
8 LAN ERROR LOG
9 MISCELLANEOUS
1 HDG OUTPUT RESTART (AUTO , MANUAL)
2 STW*6 (VECTOR , SCALAR)
AP-2
Continued from page AP-1
1 MAIN PCB
2 LCD
1 MAIN PCB
2 SUB IMU (Not available where there is no SUB_IMU board)
3 LAN_CNV PCB
4 GNSS_LNA 1
5 GNSS_LNA 2
6 GNSS_LNA 3 (Available only for SC-130 systems)
1 MAIN PCB
2 LAN_CNV PCB
3 TB_PWR PCB
Continued on page AP-3
Non-IMO types only.
*5:
Fixed for IMO types.
Available on when
*7:
Alert Mode is set to
Legacy.
*2: Selectable for DATA5 only
*4: Default for IEC61162-2 is 38400bps
*6: Non-IMO only, fixed for IMO