Table of Contents
Advertisement
M3062PT2-EPB User's Manual
(3) Errors Occur at Emulator Debugger Startup
Table 5.4 Checkpoints of errors at debugger startup
Error
Target MCU is uncontrollable.
REJ10J0868-0200 Rev.2.00 January 16, 2006
(1) Check that the NQPACK etc. mounted on the user system is soldered
properly.
(2) Check that the connector is installed properly to the user system.
(3) In memory expansion mode or microprocessor mode, check pins
RDY# and HOLD# are at "H" level.
5. Troubleshooting
Checkpoint
Page 97 of 102
Advertisement
Table of Contents
